top of page


Specialising in all aspects of electrical work, with experience in both Domestic, Commercial & Industrial environments

What's Involved In Rewiring

Rewiring is one of the most difficult maintenance tasks a homeowner can face. It is a major project with works carried out in every room. Your home’s electrical system is powered by cables usually buried in the walls. It is recommended that these cables are replaced every 25 years. The cables provide the power to your socket outlets, your lights, and all other electrical items in your home, such as your cooker and boiler. Sub-standard and wrongly installed electrics can result in fires, and electric shocks. Older cables can deteriorate, cables that in the past were thought to be safe, have since been proven to be unsafe and hazardous. We rewire your home to eliminate any potential problems and ensure everything is modern, safe, and certificated.

When we arrive at your property, we spend time arranging and preparing the site for works to begin. It is important you carry out the necessary preparations stated in our terms.


Chasing Brick Walls Gets Messy!

If the property is old enough to need rewiring, it is likely it will be internally constructed of brick or lath/plaster. On brick we use wall chasers with dust extraction, and breaking power tools. These tools allow us to work through the brick quickly and efficiently, however they can still create some dust. On lath/plaster walls we cause minimal damage to the internal strapping. Any damage caused would be suitably bonded to make sure it’s still structurally sound.

Floorboards don’t always come up easily, we use appropriate tools to ensure the best cuts are made to minimise damage. We understand that potentially you may wish to re-sand your floorboards. When we remove the floorboard, we then route our cables either by boring holes in the joist.

bottom of page